Three-phase pad-mounted transformers are compact power centers for commercial or industrial applications. With proper design selection, they can be located near or inside buildings for greater flexibility and savings.
TYPE: Three-Phase, 50 or 60 Hz, 65 (55/65 Optional)
LIQUID TYPE: Mineral Oil or Envirotemp FR3 Fluid
KVA: 45-7500
PRIMARY VOLTAGE: 2400-43, 800 V (250kV BIL) With or Without Taps, Delta or Wye Connected, Dual Voltages Available
SECONDARY VOLTAGE: 208Y/120 V to 24, 940 V
Three-phase pad-mounted compartmental type distribution transformers are designed for indoor or outdoor locations. Unobtrusive construction allows them to be installed in locations exposed to public view like schools, shopping centers and industrial sites. A wide array of configurations and accessories are available to meet a broad range of application demands.
Three-Phase Pad-Mounted VFI Transformer Three-phase pad-mounted transformers are compact power centers for commercial or industrial applications. With proper design selection, they can be located near or inside buildings for greater flexibility and savings.
Meets or exceeds IEEE, ANSI, CSA/CEA and
NEMA Standards
Bolted cover for tank access (45-1000 KVA)
Welded cover with handhole (1500-7500 KVA)
Three-point latching door for security
Lightning arrester mounting provisions (live-front)
Laser-scribed anodized aluminum nameplate
One-inch drain valve with sampling device in
Low-voltage compartment (45-7500 KVA)
One-inch upper fill plug
Automatic pressure relief device
20? Deep cabinet (45-1000 KVA)
24? Deep cabinet (1500-7500 KVA)
30? Deep cabinet (34.5/19.92 kV)
Removable sill for easy installation
Steel divider between high-voltage and
Low-voltage compartments
RTE (15, 25 kV) 200 A HTN bushing wells (dead-front)
Cooper electrical-grade wet-process porcelain bushings (live-front)
Lifting lugs (4)
Stainless steel ground pads (45-500 KVA)
Stainless steel NEMA 2-hole ground pads (750-7500 KVA)
Stainless steel cabinet hinges and weld studs
Three-Phase Optional Features
Liquid level gauge
Pressure vacuum gauge
Dial type thermometer
One, two, or three On/Off loadbreak switches
4-position loadbreak switch (choose V-blade switch or T-blade switch)
Low-voltage 6-, 8-, 10-hole spade
Low-voltage 12-, 16-, 20-hole spade (750-2500 KVA)
Low-voltage bushing supports
RTE (15, 25 kV) high-voltage 200 A bushing inserts
RTE (15, 25 kV) high-voltage 200 A feedthru inserts
RTE (15, 25 kV) high-voltage 200 A (HTN) bushing wells with removable studs
RTE (15, 25, 35 kV) high-voltage 600 A deadbreak
One-piece bushings
Hexhead captive bolt
Ground connectors
Drain/sampling valve in high-voltage compartment
Breaker mounting provisions
Stainless steel nameplate
Stainless steel tank base and cabinet
Stainless steel tank base, cabinet sides and sill
Service entrance (2 inch) in sill or cabinet side
Nitrogen blanket with bleeder and purge valve
Delta-wye switch
Auxiliary contacts for liquid level gauge
Auxiliary contacts for dial type thermometer
All copper windings
Globe type upper fill valve
K-Factor rated transformer
FM Approved and Code Listed transformer
Envirotemp FR3 fluid, a fire-resistant, seed oil-based dielectric coolant with desirable environmental characteristics
CSA/CEA designs Per UL Classification
Audited Supplier 
){kind=link}
){kind=link}